1. Weak Steam:

• The Culprit:

  • Clogged Steam Tip: Coffee oils and milk residue can build up, restricting steam flow.

  • Low Boiler Pressure: If the boiler isn't generating enough pressure, the steam will be weak.

• The Fix:

  • Clean the Steam Tip: Backflush the steam wand with hot water or use a cleaning needle to remove clogs.

  • Check Boiler Pressure: Ensure the machine is properly warmed up and the boiler is reaching the correct operating pressure.

2. Leaking Steam Wand:

• The Culprit:

  • Faulty Solenoid Valve: The valve that controls steam flow may be malfunctioning, allowing steam to escape when it shouldn't.

  • Worn Gaskets or Seals: Seals around the steam wand can deteriorate over time, causing leaks.

• The Fix:

  • Check the Solenoid Valve: If you're comfortable, you might be able to troubleshoot the solenoid valve yourself. Otherwise, professional repair is usually necessary.

  • Replace Worn Gaskets: If the leak is coming from around the wand itself, replacing the gaskets may resolve the issue.

Prevention is Key:

• Regular Cleaning: Clean the steam wand regularly to prevent clogs and buildup. Try using a cleaning solution such as the Roobi cleaning tablets (View on Amazon)

• Proper Purging: Always purge the steam wand before and after steaming to prevent milk residue from drying inside.

• Descaling: Descale your machine regularly to remove mineral deposits that can affect steam production. A good descaler is the Roobi descaling solution (View on Amazon)

By understanding these common issues and following these troubleshooting tips, you can keep your Breville steam wand functioning optimally and continue to enjoy delicious, perfectly steamed milk for your coffee creations.

Disclaimer: This article provides general information and troubleshooting tips. If you're experiencing persistent problems with your Breville steam wand, it's always best to consult the user manual or contact Breville customer support for specific guidance.